Anti-corrosion coatings wind began to rise

Time:2011-08-03Hits:891

China second five new energy goals: to promote wind power in situ conversion. Currently, wind power has been the scale of China's wind power industry, the soft underbelly of development, wind power to insist on walking on two legs, namely, long-distance transmission and local transformation. The current focus should be placed on the in situ conversion. Abroad, mostly wind power development ideas "distributed", and place into doing very well, reduce line losses, reduce grid investment, wind power is to bear the brunt of the beneficiaries of local residents and businesses. China's special circumstances, decide the wind power idea is to "build a large base, into the bulk power system", before the in situ conversion of wind power focus too few new ideas into place for wind power consumptive opened a new path , the use of the form diversity of wind power, especially in economically developed regions is much to do. "Five" should be out of the practical ways to give full play to large-scale development of wind energy an important role in structural adjustment.

China's wind power development
January 2011, the National Development and Reform Commission of Energy announced: Gansu, Inner Mongolia and Xinjiang wind power installed capacity of brisk growth, marked the end of 2010, total installed capacity of wind power in China reached 41.827 million kilowatts, compared with 2009. 62% surge year on year, for the first time surpassed the U.S. as the world superpower of wind power installed capacity.
Why wind needs anti-corrosion coating
China's desert air TV multi-building materials such as unmanned areas, sand and sea breeze on wind turbine blades, etc. will cause a large degree of corrosion, resulting in wind power equipment, shortened life expectancy. Therefore, we must rely on anti-corrosion coating to ensure the safe operation of equipment and continuation of life.

China's wind power paint began to rise
With the substantial growth rate of installed capacity, wind power in China coatings market in a fierce battle. From Denmark, Germany, Italy, the U.S. chemical coatings company, by virtue of their use in the field of wind power for many years of experience and proven anti-corrosion protective coatings, paints the first of China's wind power market, the "hegemony." By design, wind power generation equipment life is 20 years, but due to sand erosion, and some "foreign brand" equipment operating less than five years has been variegated.
For anti-corrosion coatings, anti-corrosion coating of wind power is different from the paint, it needs to be able to fight the wind sandstorm attacks, to protect the normal operation of equipment, although the domestic paint manufacturers on the development of wind power is only just beginning to paint, but this valuable market should be to actively fight for the country's policy support, wind power and other new energy sources is also stepping up efforts to support, like the cosine of the bow and arrow; opportunity is always left off.

The advent of China's paint business opportunities
One may raise small series of HC questioned why the paint is always said to do wind power, there are many foreign manufacturers are doing, failed to reach the domestic level the level of foreign, investment money is not it a disadvantage; Here HC Xiaobian for you to answer this question.
Now the whole domestic and foreign manufacturers of wind turbine blades using the following five major paint brands:
- Italy: Mega good quality gel coat system
- Germany: Mankiewicz good quality gel coat system
- Germany: Bergolin good quality gel coat system
- U.S.: PPG-Selemix the general quality of non-gel coat system
- Germany: Basf-Rulis the general quality of non-gel coat system
The five foreign brands account for half of China's wind power coating, but China's wind farms are located in the impact zone sand, this is why Mankiewicz, Bergolin, Mega, etc. to the Chinese market has been using a gel coat system is not lower their own standards . The PPG-Selemix, Basf-Rulis so that no gel coat, not 100% solids of the topcoat, can adapt to the European quality of atmospheric environment in China wind farms simply can not resist the impact of sand, only the latter two can be used as a decorative paint, dust impact in the region no practical value. While they are established businesses, but they come to China, but also to develop the new coating for our situation, this opportunity I believe I need to go about HC Xiaobian it.
Domestic paint manufacturers for wind power development is only just beginning to paint, because wind power is different from the heavy-duty paint coatings, the raw material of his demanding, it may be possible in the development process will encounter many obstacles, but the Sunshine after the storm, storms in order to usher in a beautiful rainbow, looking forward to China's wind power industry in the future corrosion tomorrow.

Source: Polaris Power Network News